Item No.:MS-3000L
Capacity:3000VA
System Voltage:110VDC
Best Output power everyday:6000WH

Inverter:
Output wave:pure sine wave
Output voltage:AC110/220V
Output frequency:50HZ/60HZ
Overload ability:120%,30 seconds
Invert efficiency:>85%

Solar

Stardard:A-Level Mono Solar Panel
Module Size:1957*992*50mm
Cell Type:156*156mm poly/mono solar cell
net weight:22.5kg
Max System Voltage:1000VDC
Max Series Fuse Rating:15A
Tempered Glass:3.2mm iron tempered glass
Frame:Anodized Aluminum frame
cable:cable diameter:4.0mm2,Cable

1.Adopt pressed mixer chamber to ensure the quality of mixing.get the best efficiency.
2.The cooling water and steam is controlled by automatic.can rapidly convert according to the set work temperature.Make sure the quality and efficiency.suit for a wide temperature and improve the

This vulcanizing machine is used to make all kinds of vulcanizing mould,rubber products,plastics products,and testing pieces used by institute and university.Being a column structure and downward pressing type, the heating plate opens by the self-weight of the heating plate, platform and

Lab mixing mills are just like mixing mills but they are smaller in size. The rollers of lab mixing mill are made of cast iron rollers and possesses a good surface hardness. The rollers of lab mixing mills are cooled by water and heated by the steam inside.Or simply heated by electricity. The mill

This machine is made of multi-cylinder or single-cylinder type,with fast and slow opening mould,pushing mould and setting the speed of the plate when up and down.Those functions brought great facilitate for making silicon rubber insulator,lighting rodconveyor belt joint repaoring,cable connector

Rubber Injection Molding Press is an advanced rubber pressure moulding equipment with compact structure,wide applicability and high degree of automation,especially,it is suitable for producing rubber model products with metallic insert,complex shape,big cross-section and thick-wall,these products'

The machine is used for mixing and kneading raw rubber,synthetic rubber,thermoplastics or EVA with chemicals into even materials.The even materials can be fed to calender,hot presses or other processing machinery for making rubber or plastic products.
Rubber mixing mill machine for double

Rubber kneader is mainly used for natural rubber, synthetic rubber, plastic, rubber and plastic refining and mixing, rubber and plastic blending, also suitable for various kinds of low viscosity materials of blending.
The equipment is widely used in rubber products industry, such as: I, cable

1. This equipment possesses temperature and time control system for easy and accurate operation and best dispersion
2.Tilt-able mixing chamber and mechanical shaft sealing design for easy cleaning and colour changing.
3.About 6-10 minutes mixing time per batch,it's efficient is 2 times of wheel

This vertical rubber cutter is mainly used to cut the natural rubber, synthetic rubber, and other plastics materials, especially it is suitable to be installed near the rubber mixer to cut small piece of rubber. This vertical rubber cutter mainly consists of rubber knife, frame, cylinder, base,

This machine is used for pressing all kinds of rubber mould products and thermosetting plastic like as related specifications sealing products,projected rubber,rubber plat and so on.These series products have advantage of big unit area pressure t guarantee quality of rubber products.We also can