Electric Flat Die Pellet Mill

Portable pellet mill, as its name suggests, is a kind of movable machine used for producing pellets. You can easily move it to places where there are raw materials. The portable pellet mill driven by electricity is called electric flat die pellet mill. You can use the Vietnam machine to process a variety of agricultural and forest wastes, such as sawdust, paddy straw, rice husk, palm kernel shell and many other wastes into pellets for small scale pellet business. With low energy consumption, good efficiency and competitive price, various models of flat die pellet mills are offered for Vietnamese pellet production!
Unique features of Electric Portable Pellet Mill
1. Driven by electric motor makes more energy-saving.
2. The flat die pellet mill is made of wear-resistant material thus having a long service life
3. Changeable pressure does not only improve the press power of the roller, but also prolong the service life
4. The pelleting process is visible, so you can monitor the pelleting process directly by watching the pelleting chamber.
How to Make Pellets by Electric Flat Die Pellet Mill
1. Insert the plug of the machine, and press the start button. The engine should start and the rollers rotate. If the rollers do not rotate, press the stop button immediately to check for fault.
2. Place a container under the pellet discharge chute.
3. Feed the raw materials into the feeding hopper and then control the speed by the handle of the feeding control tray.
4. After a short time, pellets will fall into the container. After cooling, pellets will become hard.
5. Feed the rest of the material and change the container when it is full.
6. Do not stop the machine during the pelletizing (except for emergency), otherwise the pellet machine will be clogged when restarting.
7. Stop the pellet mill by pressing the stop button.
8. Clean the pellet mill after a shift. This step is very important as if the residual raw material will stick on the roller and die when it cools completely and it is difficult to be removed.
Factors Affect Pellet Quality
1. Material requirement
Moisture content: for different kinds of raw materials, the requirement on the moisture is different. Usually we require sawdust moisture content 10%-18% while mix materials evenly.
Particle size: the length of the material can not exceed the diameter of the die hole. For example, if the diameter of the die hole is 6mm, the length of the sawdust could not be longer than 6mm. Please ensure the right size of raw material according to the diameter of the die hole.
2. Gap between die and rollers
Gap between die and rollers has great influence on pellet quality. The best gap is 0.1mm - 0.3mm. This gap depends on different material. When the gap is over 0.3m, the capacity will be reduced by thick material on die. When the gap is less than 0.1mm, it will aggravate the wear of die and roller and reduce service life.
Maintenance of Electric Flat Die Pellet Mill
The maintenance of our pellet mill includes lubrication and inspection & maintenance of the die and roller. Lubrication is adaptable according to time and components. Basically, lubricating oil is necessary to be added to gearbox and all bearings in gear box and other rotating parts properly before your initial operation. After three months, you can lubricate the gear box for second time. Then every six months’ lubrication is available. Inspection& maintenance of rollers and die are recommended to conduct at the same time. Every time before starting the machine, you’d better to check up whether there are any extra matters in the pelletizing room or affecting the running. Besides, both sides of the die can be used for pelletizing, which can save a lot energy and cost for you.
Technical Data of Electric Flat Die Pellet Mill

Model	Voltage	Dia. of flat die	Hole size	Moisture	Capacity	Packing size
AMSPLM 120	Single phase:220V 50HZ        Three phase: 380V 50HZ Voltage: 3kw	120mm	2.5, 3, 4, 5, 6, 8, 10mm	12%-20%	60-100kg/h	75*35*65cm
AMSPLM 150	Three-phase: 380V 50HZ Voltage: 4kw	150mm	2.5-10mm	12%-20%	90-120kg/h	75*35*65cm
AMSPLM 200	Three phase: 380V 50HZ Voltage:7.5kw	200mm	2.5-10mm	12%-20%	200-300kg/h	100*43*95cm
AMSPLM 230	Three phase: 380V 50HZ Voltage: 11kw	230mm	2.5-10mm	12%-20%	300-400kg/h	114*47*97cm
AMSPLM 260	Three phase: 380V 50HZ Voltage: 15kw	260mm	2.5-10mm	12%-20%	400-600kg/h	112*52*107cm
AMSPLM 300	Three phase: 380V 50HZ Voltage: 22kw	300mm	2.5-10mm	12%-20%	600-800kg/h	127*52*107cm
AMSPLM 360	Three phase: 380V 50HZ Voltage: 22kw	360mm	2.5-10mm	12%-20%	600-800kg/h	134*58*106cm
AMSPLM 400	Three phase: 380V 50HZ Voltage: 30kw	400mm	2.5-10mm	12%-20%	900-1100kg/h	152*60*115cm